Beads Out Level 1 Walkthrough Solution | Beads Out 1

Beads Out Level 1 Guide: The O-Ring Tutorial

This is where the game begins. Beads Out Level 1 introduces you to the core physics of the board, and you need to understand exactly how the track moves before the game gets brutal later on. This specific board features a massive, continuous "O" shaped Conveyor. Four dominant colors pack the track tightly: a large block of Green on the left, Yellow sitting on the top-left curve, Red dominating the top-right, and Blue anchored at the bottom-right.

The bottom Box placement is straightforward but sets the rule for everything that follows. You have three Boxes sitting directly below the four empty slots of the Dock. Red sits on the left. Blue sits in the dead center. Yellow sits on the right. Below that row, a single Green Box rests in a lower, isolated recess.

Because this is the introductory stage, you do not have to worry about complex blockers like a Crate Lock or a Sealed Cube. The entire puzzle is a straight feed. The Conveyor is completely full. The bead snake is unbroken. Green touches Yellow, Yellow touches Red, Red touches Blue. If you let the wrong beads hit the center exit chute without a matching Box in the Dock, the track stops.

Reading the Board in Beads Out Level 1

Look closely at the layout before you start tapping. The "O" ring design means there is only one exit point. It sits exactly at the bottom center of the track. Right now, the blue beads are parked immediately at the right lip of that exit chute. The green beads are parked at the left lip.

The Dock has exactly four empty square outlines waiting for your input. This is the most crucial piece of math in the game. You have four Boxes on the lower half of the screen. You have four slots in the Dock. This means you can queue every single Box on the board right from the start. You do not have to worry about buffer economy or running out of space. That luxury disappears quickly in later levels, but right now, it makes the board completely safe.

Notice how the colors are distributed. The blue section is relatively small compared to the massive green block on the left side. The red and yellow sections share the top curve. When you activate the first Box, this unbroken chain will tear apart. Gravity and track suction will pull the remaining beads toward the exit. The right side of the Conveyor will empty first because the blue beads are blocking the immediate right-side feed.

Do not ignore that bottom Green Box. It looks isolated down in its own little cutout, but it is just as critical as the top three. If you pull Red, Blue, and Yellow into the Dock but leave Green behind, the entire Conveyor will eventually jam when the green block slides down to the exit chute.

Beads Out Level 1 Step-by-Step Walkthrough

Follow this exact sequence to clear the board smoothly and watch how the physics engine handles the bead snake.

1. Tap the center Blue Box. It will snap into the second slot of the Dock.
2. Watch the blue beads break off from the bottom-right of the Conveyor and drain into the Box.
3. Tap the Red Box on the left side of the formation. It moves to the first Dock slot.
4. Tap the Yellow Box on the right side. It takes the third Dock slot.
5. Tap the isolated Green Box at the very bottom. It fills the final slot in the Dock.
6. Let the Conveyor run automatically. The boxes will hit 100% capacity one by one and pop off the screen.

Activating the First Clear in Beads Out Level 1

The game literally points a finger at the center Blue Box. Tap it immediately. This is the trigger that wakes up the board. The blue beads are sitting right at the throat of the exit chute. The second that Blue Box hits the Dock, the suction begins. The entire bottom-right segment of the track empties out rapidly.

This creates a massive visual change on the board. The unbroken chain is broken. A huge vacuum opens up on the right side of the "O" ring. The remaining beads do not just sit there. The track spins. The massive block of red beads sitting at the top-right gets pulled violently downward to fill the empty space left by the blue beads. Yellow gets dragged from the left side over to the right. Green gets pulled up toward the top. You must anticipate this rotational shift in every future level.

Filling the Capacity in Beads Out Level 1

Once the blue segment is gone, the red beads hit the exit chute. This is where you transition to full board control. You have three empty slots left in the Dock. Do not wait. Tap the Red Box. Tap the Yellow Box. Tap the Green Box.

Fill the Dock completely. Once all four Boxes are locked in, you get to watch the game handle the sorting automatically. The percentages on the Boxes will start climbing wildly. The Red Box will hit 55% as the middle of the snake drains. The Yellow Box will hit 65% almost immediately after. The track is now spinning continuously. The remaining blue, green, and yellow beads are compressing into a tight clump as they race toward the bottom center exit.

The Final Drain in Beads Out Level 1

With the Dock fully loaded, there is zero risk of a track jam. The left side of the Conveyor will eventually empty out completely as the massive green chunk finally reaches the bottom exit chute.

Watch the specific order of the clear. The blue beads finish first because they were closest to the door. Red finishes second. Yellow and green follow as the tail end of the snake gets sucked down the chute. A Box only leaves the board when it is fully packed. One by one, the four Boxes hit 100% and vanish. The gray track sits empty. You have beaten the opening board.