Beads Out Level 135 Walkthrough Solution

Beads Out Level 135 Guide: The Crate Lock Pin Trap

Beads Out Level 135 hits you with a massive traffic jam immediately. The board is split into two distinct tracks: an outer U-shape feeding directly into an inner O-shape loop. You cannot just tap blindly here. The inner loop is completely choked with Grey, Brown, Cyan, Pink, Purple, and Yellow beads. The outer tracks are stacked high with their own color blocks waiting to flood the center.

The real problem sits in the lower Dock. You have a dense multi-row grid of Boxes, but a literal wooden stick blocks the action. This pin physically locks the board state, tethered directly to the Yellow Box in the top center of your Dock. The bottom right corner also features an isolated Brown Box trapped behind a hard wall. You have to route the inner loop perfectly before you even think about the outer arms. Make a mistake early, and the inner O-shape loop gridlocks. You fail.

Reading the Board in Beads Out Level 135

You need to understand the exact feed order of this Conveyor system before making a single move. The outer U-shape track holds two distinct lines. The left track contains White, Green, Brown, and Pink beads. The right track holds Grey, White, Pink, and Cyan beads. Neither of these outer tracks can move until you carve out physical space in the inner O-shape loop.

The inner loop is your immediate threat. It holds six distinct color blocks: Grey at the top, Brown on the right, Cyan on the bottom right, Pink directly at the bottom exit point, Purple on the bottom left, and Yellow on the far left.

Now look at your Dock. It is heavily congested. The top row holds Green, Brown, Yellow, Blue, and Green Boxes. The middle row contains Purple, Grey, and Pink Boxes. The bottom row holds White, Pink, and Cyan Boxes. Way off to the right, sitting at the bottom of a walled-off vertical chute, is a single Brown Box.

The biggest trap in Beads Out 135 is the outer left track. The Pink beads at the bottom of that left arm look tempting, especially since you have a Pink Box waiting in the Dock. Do not touch them. Tapping the outer tracks forces them into the inner loop, instantly crashing into the existing beads and causing a fatal jam. The board requires sequential clearing. You must drain the bottom half of the O-shape loop first. Everything else is bait.

Beads Out Level 135 Step-by-Step Walkthrough

Follow this exact sequence. The dependency chain here is rigid. You have to pull the blocker, drain the bottom exit, and then carefully merge the outer arms.

Pulling the Pin in Beads Out Level 135

Your opening sequence requires strict discipline. Do not look at the outer U-shape Conveyor. Focus entirely on the center.

Tap the Yellow Box in the top row of the Dock. This pulls the wooden Crate Lock pin out of the board. The game explicitly forces this action. Until that pin is gone, the board remains dead.
Target the Pink beads sitting directly at the bottom exit of the inner loop. Route them straight into the Pink Box located in the middle row of your Dock.
Tap the Cyan beads immediately to the right of the exit point. Send them into the Cyan Box on the bottom row.
Clear the Purple beads from the bottom left of the inner loop. Feed them into the Purple Box in the middle row.
Clear the Yellow beads from the left side of the inner loop.

At this point, the bottom half of the inner loop is entirely empty. You finally have breathing room.

Managing the O-Ring Feed in Beads Out Level 135

The transition phase is where most players ruin their run. As you clear the bottom of the inner loop, the remaining top beads will slide down, and the outer tracks will start bleeding into the center.

Tap the Grey beads that have now slid down from the top of the inner loop. Send them into the Grey Box in the middle row.
Tap the Brown beads from the right side of the inner loop. Route them into the top row Brown Box.
Watch the right outer track. The Cyan beads at the bottom of this track will slide into the inner loop first. Grab them and fill any remaining Cyan capacity in the Dock.
Pull the Pink beads from the right outer track. Send them to the lower Pink Box.
Clear the White beads from the right track, routing them to the White Box in the bottom left corner of the Dock.
Finish the right track by clearing its top Grey block.

You must clear the right outer track before starting on the left outer track. The right side feeds in faster due to the rotation of the inner loop. Mixing pulls from both sides will cause an overlap at the top of the O-shape loop, leading to a jam.

The Isolated Chute in Beads Out Level 135

You are now looking at a mostly empty board, but the left outer track and the walled-off right corner still need handling. The lower Dock has shifted its remaining Boxes to the bottom edge.

Pull the Pink beads from the bottom of the left outer track.
Send the Brown beads from the left track straight into the isolated Brown Box sitting in the vertical chute on the far right. This Box is finally accessible now that the top rows of the Dock are out of the way.
Clear the Green beads into the remaining Green Boxes on the left side of the board.
Send the final White block into the last White Box.

Clear the board. Keep the track order strict, and Bead Out Level 135 collapses fast.

Beads Out Level 135 Walkthrough Solution | Beads Out 135