Beads Out Level 20 Walkthrough Solution | Beads Out 20

Beads Out Level 20 Guide: The Mystery Box Wall

Beads Out Level 20 throws a massive roadblock at you right from the start. A solid wall of dark grey question marks blocks almost the entire lower half of the playfield. You are staring at a heavy concentration of Light Blue, Grey, Light Pink, and Brown boxes in the top accessible row. Below them, a Red box and another Grey box sit trapped.

Everything else is locked behind six Mystery Boxes that form an impenetrable barrier across rows two and three. At the very bottom, shoved off to the left, are Dark Blue, Green, and Magenta boxes. You cannot touch them until you tear down the wall above.

This board forces you into a tight corner. You only have a four-slot Dock. The dual-feed Conveyor at the top pumps solid Red beads on the left and solid Grey beads on the right, but the main S-curve track is heavily fragmented. Short, choppy segments of orange, brown, pink, yellow, and green clog the middle loop. If you pull the wrong box to the Dock early, you will permanently jam your board. Beads Out 20 is a strict test of order and discipline.

Reading the Board in Beads Out Level 20

Look straight at the top of the Conveyor. You have two massive entry pipes. The left pipe is packed tight with red beads. The right pipe is packed with grey beads. These feed into a winding S-curve before hitting the bottom exit.

Do not let the massive pile of red beads trick you. The Red Box sitting in the second row is absolute bait. It looks incredibly tempting to pull that Red Box up to your Dock because you see all that red waiting in the left pipe. Do not do it. Those red beads are stuck behind the entire S-curve of other colors. If you pull Red early, it sits in your Dock dead and useless, eating up 25% of your buffer.

Your top row of accessible Boxes features Light Blue, Grey, Light Pink, and Brown. Right below the top Grey box is a second Grey box. This is your actual opening advantage.

The S-curve track near the bottom exit is lined up perfectly for a quick opening clear. You have Light Blue, Green, Yellow, Blue, Brown, Purple, and Orange sitting near the drop zone. Notice that Light Blue and Brown perfectly match your top row Boxes.

The real threat in Beads Out Level 20 is the row of four Mystery Boxes cutting across the middle of the grid. You have zero information on what colors they need until you clear the boxes sitting directly on top of them. The bottom offset row holding Dark Blue, Green, and Magenta is completely dead space until the endgame. Your entire strategy revolves around cracking the top row safely to force the Mystery Boxes to flip.

Beads Out Level 20 Step-by-Step Walkthrough

Follow this exact order to keep your Conveyor moving and your Dock clear. Speed matters, but pulling the right box matters more.

Cracking the Top Row in Beads Out Level 20

Your opening taps dictate whether you survive the first thirty seconds. You must target the colors that are immediately exiting the S-curve.

1. Tap the Light Blue Box. Send it to the Dock. The very end of the Conveyor has a segment of Light Blue beads ready to drop. Clear them out immediately.
2. Tap the Brown Box. Once the Light Blue beads drop, Brown beads are sitting right behind a few blocker colors near the bottom loop. Pulling Brown early keeps the line moving.
3. Pull the top Grey Box. You have a massive feed of grey beads coming from the top right pipe. Getting Grey onto the Dock prepares you for the flood of grey that will inevitably push through the track.
4. Pull the Light Pink Box. This clears out the remaining visible top-row box. Pink beads are scattered in short segments throughout the middle of the S-curve.
5. Ignore the Red Box. Leave it exactly where it is in the second row. It is surrounded by Mystery Boxes and acts as a trap for impatient players.

Surviving the Mystery Box Reveals in Beads Out Level 20

Once you clear the Light Blue, Grey, Light Pink, and Brown boxes from the top row, the board state aggressively shifts. The Mystery Boxes underneath will crack open and reveal their colors.

1. React to the Yellow reveal. One of the left-side Mystery Boxes will expose a Yellow box. Pull it to the Dock immediately. The middle loop of the Conveyor is packed with yellow beads that are now pushing toward the exit.
2. Tap the second Grey Box. You exposed a second Grey box in row two. Put it on the Dock. Let the grey beads from the right feed fill it up. This clears a massive chunk of track space.
3. Finally pull the Red Box. The red beads from the left feed are finally reaching the bottom loops of the S-curve. Tap the Red box and let it absorb the incoming red segments.
4. Clear the remaining Mystery Box reveals. As the row three wall drops, you will see a mix of purple, orange, and light blue requirements. Match them directly to the short, choppy segments currently jamming the middle loop of the track. Keep one Dock slot empty at all times. A sudden color shift will kill your run if your Dock is completely full.

Cleaning Up the Bottom Offset Row in Beads Out Level 20

You broke the wall. The Mystery Boxes are gone. You now have direct access to the final three boxes tucked into the bottom left corner of the grid: Dark Blue, Green, and Magenta.

1. Tap the Green Box. The bottom exit of the Conveyor likely has a massive green segment waiting from the early S-curve traffic jam. Pull Green up and let it clear.
2. Pull the Magenta Box. Purple/magenta beads dominate the mid-to-late section of the left feed.
3. Finish with Dark Blue. Send the Dark Blue box to the Dock.
4. Let the final remaining beads flush out of the S-curve. The board will speed up as the last few colors drop. Keep your hands off the screen and let the final boxes fill to finish the stage.